After a short power failure, Demo appears in the display and my oven will not heat up Zanussi

Last updated 10/12/2021 11:04

Issue

After a short power failure, Demo appears in the display and my oven will not heat up

Applies to

Zanussi Built In Ovens

Zanussi Compact Ovens

Resolution

To deactivate Demo Mode on your Zanussi oven


To deactivate the demo mode for the above display:

1.    Turn off the oven

2.    Press and hold     for 3 seconds

3.    The word ‘Demo’ and number ‘1’ will flash

4.    Turn the temperature dial and press   to select, enter the code ‘2468’




 

To deactivate Demo mode on above display

While oven is switched off

1. Press and hold the “+” button until the first digit blinks

2. Use the “+” and “-“ buttons to scroll through and use  to select the code “2468”


If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.