Issue
- Oven pyrolytic self-cleaning function gives poor results
- The oven cavity is not completely clean after a Pyrolysis cleaning program
Applies to
- Oven with pyrolytic self-cleaning function
Resolution
1. If a burnt grease residue continues to appear after finishing a Pyrolytic self-clean:
Select an intensive Pyrolytic program. The number of Pyrolytic programs available may vary depending on the model.
Light:1 h for slightly dirty.
Normal: 1 h 30 min for moderately dirty.
Intensive: 2 h 30 min for very dirty.
See the user manual for more information. Download the user manual.
2. Remove all parts from the oven (including shelves, rails, utensils, etc.).
3. Excess waste must be removed manually before Pyrolytic cleaning.
Before carrying out a Pyrolytic self-cleaning function or the First Use please remove from the oven cavity any excess food residues, oil, or grease spills/deposits
Remove the worst dirt manually.
Clean the inner side of the door with hot water, so that the residues do not burn from the hot air.
4. If spots continue to appear after finishing the Pyrolytic self-cleaning function:
These permanent colour changes in the enamel can, for example, be caused by fruit juices or greasy impurities in combination with high temperatures.
- These spots can not be removed.
- These are usage traces.
- They have no influence on the usability of the device and are not a defect.
Recommended: Perform the Pyrolytic program more often to prevent similar situations from occurring again.
