Dishwasher does not switch on, no light on the panel

Last updated 12/03/2021 14:10


  • Dishwasher does not switch on, no light on the panel

Applies to:

  • Integrated dishwasher
  • Freestanding dishwasher


Before starting the appliance always check:

  • The filters are clean and correctly installed. 
  • The cap of the salt container is tight. 
  • The spray arms are not clogged. 
  • There is enough salt and rinse aid (unless you use multi-tablets).
  • The arrangement of the items in the baskets is correct. 
  • The programme is suitable to the type of load and the degree of soil. 
  • The correct quantity of detergent is used.

If dishwasher is flashing and the programme is still not starting:

  • Make sure that the mains plug is connected to the mains socket.
  • Make sure that there is no damaged fuse in the fuse box. 
  • Make sure that the appliance door is closed. 
  • If the delay start is set, cancel the setting or wait for the end of the countdown. 
  • The appliance recharges the resin inside the water softener. The duration of the procedure is approximately 5 minutes. The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance. 


If the problem occurs persists, please contact an Authorised Service Centre 03445 610643

Book a repair
Book a repair

Need to arrange a repair technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.