How to disassemble and assemble dishwasher door hinge

Last updated 05/03/2024 11:13

Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

Always take care when moving appliances, for heavy appliances it's necessary two persons to move it. 

Always use safety gloves and enclosed footwear.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly


How to disassemble and assemble the dishwasher door hinge.

1. If present, remove the worktop by unscrewing the 2 rear screws (right & left) 

 Word import image

 Word import image

2. If present, unhook and remove the plinth by pushing in the lower part (right & left)

 Word import image Word import image Word import image

3. remove the outer door unscrewing the 6 screws (3 left & 3 right)


Word import image


4. If present, remove the sides (left & right) by removing the 2 screws, pushing the 2 flaps and unsnapping by the last flap

Word import image Word import image Word import image

Word import image Word import image Word import image

5. open the door and block the movement of the hinge by placing a pin in the highlighted hole 

  

6. Remove the 2 fixing screws on the inner door (right & left) and remove the outer door

 Word import image 

7. Unhook the ground wire. Unhook the hinge rod. Remove the door

Word import image Word import image Word import image

Word import image

8. Remove the 2 fixing screws and remove the hinge

  

Word import image

9. Replace the hinge using the reference highlighted below for the correct positioning


10. Assemble all the other components in reverse order of the disassembly steps.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.