Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
Always take care when moving appliances, for heavy appliances it's necessary two persons to move it.
Always use safety gloves and enclosed footwear.
Please note that self-repair or nonprofessional repair can have safety consequences if not done properly
How to disassemble and assemble dishwasher door perimetral gasket
1. Gently pull the gasket by the bottom-edge to take it out of its socket and continue until the whole gasket is taken out.
2. Start inserting the new gasket by bottom edges (left and right side). Be sure it is pressed inside the socket.
3. Continue inserting the gasket on both left and right side until reaching the top corners (left and right).
4. Use your thumbs to insert the gasket to the corners.
5. WARNING! Be sure the gasket is properly inserted in the corners (see pictures below):
Gasket properly inserted
Gasket NOT properly inserted
Gasket NOT properly inserted
6. Continue inserting the gasket on the upper part of its socket from the left and right side and ending in the middle.
