How to disassemble and assemble door gasket on door (tumble dryer)

Last updated 27/12/2023 13:41


All the work to be performed inside the appliance requires specific skills and knowledge and may only be carried out by qualified and authorized Service Engineers  

This platform is not fitted with an ON/OFF switch.  

Before you access internal components, take the plug out of the socket to disconnect the power supply.  

Some of the components in the mechanical part could cause injuries, so wear suitable protection and proceed with caution.  

Always empty the appliance of all the water before laying it on its side.  

If the appliance has to be placed on its side for maintenance or another reason, lie it on its left side, to avoid the risk of any residual water falling onto the main circuit board.

1. Gently pull the gasket to take it out of its socket and continue until the whole gasket is taken out. 

2. Start inserting the new gasket in the correct position:  

The gasket’s joint should be positioned near the door latch. Be sure that the gasket is pressed inside the socket. 

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.

Find your User Manual
Find your User Manual

Solve problems and find instructions and other documentation for your product.