Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
Always take care when moving appliances, for heavy appliances it's necessary two persons to move it.
Always use safety gloves and enclosed footwear.
Please note that self-repair or nonprofessional repair can have safety consequences if not done properly
How to disassemble and assemble the water dispenser
Remove the control panel (see relevant paragraph).
Using a screwdriver, push the tab fastening the water dispenser
on one side,
then on the other.
Remove the water dispenser.
Before intervening on the equipment place a protection above the drum in order to prevent small parts falling inside the tub.
1. Control panel
Insert a screwdriver into the side slots as indicated in the figure, first on one side and then on the other, always taking care to insert a protection between the cabinet and the screwdriver to avoid scratching the paint.
Lever downwards to widen the control panel slightly and unfasten the clips fixing it in place.
Lift the front part of the control panel slightly.
Move it towards the back.
Introduce the runner pivots (1) located on the control panel into the rails (2) found on the sides of the washing machine.
Rotate it forwards.
Press the control panel forwards until it is completely hooked on.