LED flashes on the washer - dryer's display

Last updated 27/09/2019 10:17

Issue:

  • LED flashes on the washer - dryer's display

Applies to:

  • washer dryer

Resolution:

1. Check the function buttons, which may be present on the appliance’s control panel.

  • Some or all of these combinations of LEDs switch on either at the beginning or during a cycle.

2. If a light illuminates at the end of a cycle, the cycle may be finished.

  • Check if the door can be opened or if the counter is reset.

3. If the appliance has a display, check if "End" is visible.

  • Remember that it takes approximately 3–5 minutes before the door opens after the end of a cycle.
  • This is a safety measure for all washing machines.

4. The cycle may have been interrupted or paused accidentally. 

  • Try to restart the cycle by pressing the START/PAUSE button.
  • Any faults are indicated by a flashing LED, usually accompanied by an error code visible on the display. In this case, contact an Authorized Service Center.
Book a repair
Book a repair

Need to arrange a repair technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.